how to fix a recliner

Nowadays, a recliner is the most comfortable furniture you can have. So, what happens when your trusty old recliner starts giving you trouble? What should you do if it breaks down or needs some serious fixing up?

How to Fix a Recliner: Easy Steps That Anyone Can Follow

First, make sure the recliner is well-maintained. You want to make sure that the recliner has all its parts, including the frame, the spring system, and the seating mechanism. When these are in undamaged shape, you will not have any problems with the recliner. Then, if you need to repair or replace a part, you will know how to go about doing so. Here are some tips for fixing up your favorite recliner.

  1. Check for damage.

With, your first step is to inspect your recliner for damage. If it’s obvious that something is wrong, then you’ll know how to fix it. However, if there isn’t any visible damage, then you’ll have to inspect the recliner more thoroughly. Look for signs of wear and tear, such as frayed upholstery or loose stuffing. If you can find any evidence of damage, then you will know how to fix the problem.

2. Check the recliner’s frame.

The frame is the part of the recliner that holds everything together. Nevertheless, if the frame is damaged, then it won’t hold everything in place. The frame also supports the recliner’s back and seat. If you notice that the frame is damaged, then you should act immediately.

Inspect the spring system. The spring system is the part of the recliner that keeps it upright when sitting. This part will also support the seat and back. If there are any signs of wear or tear, then you should fix them as soon as possible.

3. Inspect the recliner’s mechanism.

However, this inspection is optional. If your recliner’s mechanism is working properly, then you don’t have to inspect it. But, if you’re unsure about its functionality, then it would be best to inspect it. This way, you can determine whether you need to make any repairs to it.

4. Check for broken parts.

If you’ve noticed that one of the recliner’s mechanisms or parts is broken, then you should replace it. If a part isn’t functioning properly, then it won’t work properly.

A lot of people think that they can fix their recliner all by themselves. But, if you don’t know how to do it, then you’ll be doing more harm than good. The best thing to do is to call a professional service company for help.

If you’re confident about fixing your recliner, follow these steps. You’ll be able to fix it in no time!

How to fix a recliner mechanism

If your recliner is not working properly, it may be time to fix it. Here are some easy steps you can follow that anyone can do.

1) Identify the problem: Sometimes a broken mechanism is hard to identify and might only show signs of wear and tear but not actually break down. If this happens then start from step 3 below.

2) Follow these steps:

– Turn off power at the circuit breaker or fuse box for the room where the recliner is located.

– Unplug the recliner from the power source and remove the plug.

– Remove screws securing the mechanism to the chair, then disconnect it from any wiring harnesses or cables attached to it.

3) Start repairing: Once disconnected, start with your repair by using a small screwdriver, pliers, and hammer for each step in this order:

a) Using an Allen wrench (or hex key), loosen up all screws on armrests (all three screws on each armrest).

b) Using a Phillips screwdriver, unscrew the screws holding handles to the chair.

c) Remove all springs from inside of the mechanism and then remove any bolts that are stuck in place with pliers.

4) Reassemble: Once you have removed every spring, bolt, or screw from your repair area, it’s time to put everything back together again. Start by putting one spring into each side of the mechanism. Then replace all bolts

If your recliner has a broken mechanism, you should fix it by following these guidelines or replacing the entire chair. First, remove the chair and then re-install new mechanisms on both sides of the seat cushion so that they are even with each other. Now tighten all screws to secure them in place before finishing up by putting them back together with your favorite piece of furniture!

How to fix the springs

To fix a recliner, turn it upside down and remove the springs’ bolts that hold it in place.

If the recliner chair’s springs are not damaged, you can simply return them back to their position. If they have been damaged, follow these steps:

– Identify the loose or broken spring

– Remove the broken spring and compare it with the new one

– In case the springs were not damaged, return them back to their position and hold them into place using a string that may be pinned onto the frame of the recliner in an opposite direction from which they had slid off their holders

To fix the chair, take out the old springs using an adjustable wrench and put in a new spring. To test your seat height after replacing the springs, you flip it over to see if it is level.

How to fix the back of a recliner chair

Recliners are a popular furniture item that is loved by many people. However, some recliners have 3 types of back mechanisms and when they break down, it can be difficult to fix them on your own. This guide will teach you how to repair the back of your recliner in an easy way so you no longer face these problems.

One way to fix the back of a recliner is by pushing down on the lever with a screwdriver, checking if it’s fastened onto metal brackets, and putting it tight again. check more detail here.

Fixing a Recliner Chair Pull Handle

Repairing the pull handle is easy, but be careful not to damage anything else in the process.

Here, I will offer tips on how to fix your recliner pull mechanism that you can do yourself.

To fix a Recliner Chair Pull Handle, you must first remove the screws at either end of the handle. Then you can use an Allen wrench to loosen and tighten one or both bolts that secure it in place. You then need to release your tension on each spring by pushing down on the button located close to them (if there is no button, push straight up). After releasing all four springs from their retaining clips, re-attach them back into their slots with new wire retainers fitted into their recesses. Lastly, re-fit the handle into its slot and screw it in place with your Allen wrench.

How to fix a recliner footrest

A broken footrest on a recliner can be fixed with the following steps.

  • The footrest must be in a locked position.
  • The footrest must stay up.
  • There must be lubrication around the bolts and screws.
  • You need a screwdriver, bolts, and oil to fix it.
  • Turn the recliner upside down.
  • Check if screws/bolts are rusted or loose.
  • Replace or tighten if needed.
  • Lubricate joint on footrest then try to move arm up and down using towel.
  • Use a towel to remove excess grease from chair footrest mechanism
  • Look for a spring-like component that connects the footrest to the bushings.
  • Disassemble everything that connects to the springs
  • Get the spring out and check that everything is tightened up.
  • Check how it works by moving it back and forth
  • Disassemble everything that can stop you from reaching the ratchet.
  • Take out the screws that keep it in place.
  • Ensure footrest is moving up and down without problems.

Do not forget to check for any broken parts or screws, etc.

Fixing the recliner that’s not reclining

Follow these made-easy steps.

  • Remove the cushion so you can have access to the handle.
  • See if the cable is loose or broken.
  • For broken cables, get yourself a new one and get rid of the old one.
  • If the cable is loose, you can solve the problem by hooking it back to the lever.
  • If the lever is okay or not, find out where the problem lies.
  • Use a screwdriver or wrench so that you can tighten nuts and bolts.
  • There’s no other solution for a stripped lever but to get yourself a new one.
  • Tools you’ll need to include: pliers, screwdriver, adjustable wrench Replace parts as needed. Finally, reattach the cushions

How to fix a leaning recliner

Leaning recliners can fail at any moment, no matter the price tag or which brand is on it. Many common problems related to the recliner may have caused it to lean. Before thinking about purchasing a new one, try some troubleshooting steps first and figure out which problem you’re having with your leaning recliner.

Fixing a leaning recliner is not always something you can do yourself. Before getting professional help, it’s important to know the correct steps and make sure that they have been followed correctly. It will also be helpful to learn how much repairs cost for you to decide if this would be worth your money or not.

The first thing to do is tighten all the screws in the recliner’s base. Then, loosen the recliner’s backrests until the recliner is upright and level. You can use a towel or other soft object to prop up the recliner while you do this.

After that, you should move the recliner to an area protected from the elements and let it sit for a few days. If you don’t hear any cracking sounds after that, you can slowly reattach the backrests. But if you still hear cracking sounds, then you should consider getting a new recliner.

By following the above steps you can fix your recliner by yourself.

Frequently asked questions

A recliner repair usually costs anywhere between $200 and $500. It depends on whether or not you need to replace the entire chair or just the cushion. You should also check whether your recliner has been properly maintained over time, as this can affect its longevity as well. Regular oiling will help prolong the life of your recliner by keeping it clean and dry.

Recliner footrests that won’t close are caused by dirt, debris, or other stuff getting jammed in between the track and the slats of the track. Use a putty knife or a flathead screwdriver to fix this and carefully remove any obstructions. Then, clear all debris and dirt, and reattach the track to the frame with the screws provided.

Recliner footrest springs can break over time, especially if the chair is subjected to heavy use or is moved around frequently. To fix this, you need to remove the broken part and splice the two remaining ends together with electrical tape. Make sure you do this correctly because a few inches of electrical tape may not hold up to the stress of repeated reclining. If it breaks, then you risk electrocution. Reassemble the unit, and you’re good to go!

If your recliner has a metal frame, then the easiest way to straighten it is by heating it with a hairdryer or a heat gun and cooling slowly. If the recliner has a plastic frame, you may have to use a small screwdriver or pliers to straighten it out. Please don’t force it too much, as this might cause it to crack or break. Instead, gently tug and pull on the parts until they return to their original position. This should work as a temporary solution until the manufacturer can send you a new part.

Recliners have a mechanism that allows them to be manually locked into a certain position, thus preventing an occupant from accidentally moving it. But sometimes, this mechanism gets stuck, and you need to remove it and replace it with a new one.

If your recliner leans back too far, then you will need to adjust the leg and seat sliders. This can be done by moving the sliders outward to increase the leg and seat spacing. You may also need to adjust the recliner armrests. 

To fix a broken seat recliner lever, you need to identify what part broke first. If it’s the lever itself, it’s best to replace it. However, if the lever is stuck or does not move when you try to adjust it, you can lubricate it with oil or grease. You should also ensure that it’s not seized and the lever’s pivot point is not worn out.

Still have questions?

If you cannot find an answer to your question in our FAQ, you can always contact us
and we will be with you shortly.